Air Conditioning Installation & Repair Services

Air Conditioning2020-05-22T13:54:17-04:00

Did you know that Windsor ranks third in Canadian cities for the hottest summers and first for humidity and the need for air conditioning? That’s why our family and staff at Absolute Comfort Control Services have been providing the highest quality home cooling products and services to Windsor area families since 2006. Our rapid growth demonstrates that we truly know how to help you “keep your cool” every summer, all summer.

Air Conditioning Repair and Services

Do you have a central air conditioning system that is faulty or is increasing your energy bill each month? If so, there’s no need to “lose your cool”! Absolute Comfort offers air conditioning repair and maintenance. Simply book an annual inspection of your air conditioner as the first step in the prevention and correction of energy waste and breakdown. One of our highly trained technicians will come to quickly clean and assess the system.

We work on all makes and models in order to keep yours running as efficiently as possible for as long as possible. With that said, when you need your air conditioning fixed, we will do the repairs the same day. Also, we’ll advise on how to control your thermostat and vents for their maximum cost saving benefit. Check out our great price, on annual routine inspection and maintenance for your air conditioner and furnace.

Don’t let a Freon leak, motor part, thermostat problem or even deficient duct work prevent cool air from getting to all parts of your home easily and at affordable prices. Get the Absolute Comfort Advantage today by calling: 519-252-2699.

Couple enjoying cool home thanks to Absolute Comfort's air conditioning installation.

Air Conditioner Installation

With at least half of your annual energy bill going toward cooling and heating your home, it only makes sense to invest in a more energy-efficient central air conditioning system when your current one is near the end of its 10-20 yr. life expectancy.

A high-quality Trane air conditioner from Absolute Comfort Control Services offers the best reliability and warranty protection along with up to 15% savings a year on your cooling costs. Over time, a more efficient system’s lower operating cost will more than pay for the higher upfront cost. In addition, it is less harmful to the environment because the refrigerant in newer units does not deplete the ozone.

Since our company is a participating contractor in the Heating and Cooling Incentive from the Ontario Power Authority, you can receive from  $250 up to a $650 rebate from the Ontario Power Authority on the purchase and install of an eligible unit. Just one more reason to “Get the Absolute Comfort Advantage” and join the ranks of satisfied customers. Contact us today and get the air conditioner you need to cool your home this summer!

Absolute comfort Contact us today advertisement
Special Financing Available

Air Conditioning FAQs

How does an air conditioning system actually work to cool the air in my home?2017-04-05T18:10:02-04:00

“An air conditioning system consists of 2 parts: an outdoor unit (where liquid refrigerant is contained) and an indoor coil (where the refrigerant is pumped into). As the air moves across the air conditioning coil (usually located on top of the furnace), the refrigerant removes the heat from the air as well as the moisture by condensing it on the cold surface of the coil. In this way, an air conditioner not only cools but also dehumidifies the air. Virtually any system can have air conditioning hooked up to it provided that it is a forced air system. In cases where there is not forced air heating or a duct system, “”ductless”” air conditioning systems to cool an entire home or small business.”

Can I turn off the power to my central air conditioning system during the cold winter months?2017-04-05T18:09:44-04:00

Yes, you can. There is a disconnect in your panel box or at the outside unit. Turn it off over the winter and save energy. But when you turn it on again in the Spring, do it at least 24 hours before turning on the cooling equipment. A day`s delay will give the oil time to warm and lubricate the essential parts upon startup.”

Should I cover my outdoor air conditioning unit during the cold winter months?2017-04-05T18:09:30-04:00

“The one thing you should do is cover the top of the condensing unit (with a piece of plywood with something to hold it down) so that no debris can get in. We recommend putting some sort of a hard cover over at least the top of the unit to also protect against damage from falling ice, etc. A specially made cover is a good idea but it`s not absolutely essential. A cover will also protect the finish and guard against rodents making the unit their winter home. Any cover, however, must be removed before the start of operations the following Spring.”

What is a S.E.E.R. (Seasonal Energy Efficiency Ratio) rating and what does it mean to you?2017-04-05T18:10:21-04:00

S.E.E.R. stands for Seasonal Energy ,Efficiency Ratio, the standard measurement of air conditioning efficiency established by the U.S. Department of Energy. What does this mean to you? Higher S.E.E.R. ratings translate into greater energy efficiency which means lower summer cooling bills. The most important thing to remember is the higher the S.E.E.R. rating, the more money you save. hy a higher efficiency rating (SEER) saves energy: If your current air conditioner or heat pump is more than 10 years old, it could be operating at lower than 8.00 S.E.E.R. Compare the estimated annual bill of an 8.00 S.E.E.R. system to that of a higher S.E.E.R., such as a 12.00 or 13.00. For instance, if the annual cooling bill of an 8.00 S.E.E.R. system in a particular area is $1,000, it would cost only $615 for a 13.00 S.E.E.R. system to operate at the same capacity in the same area. This is an annual savings of 38%.

How efficient is my standard 1″ throw-away filter as far as how much it will remove from the air?2017-04-05T18:07:04-04:00

A standard 1″” throw-away furnace filter is between 5-10% particle efficient. This means that across the particle size spectrum, these filters will only trap about 5-10% of what passes through them. You can improve the efficiency of the filtration of your heating and/or cooling system by upgrading to either a media or electronic style filter. Their particle removal efficiencies are 60-65% and 90-95%, respectively and either is quite an improvement over standard 1″” filtration capabilities. By doing an upgrade like this, you will also cut down on maintenance costs on the system as dirty systems are the #1 cause for malfunction. This will also boost the efficiency of the system as the heat and cooling transfer coils will be able to operate with the least amount of resistance.

How often should I change the standard throw-away 1″ filter on my furnace?2017-04-05T18:06:37-04:00

You should change your standard 1″ furnace filter every 6-8 weeks. Believe it or not, a filter actually becomes more efficient as it get dirtier…up to a point. After peak efficiency is reached, the efficiency drops again. Make sure to inspect the filter and use your own judgment. Don`t let the filter get “”clogged”” as this can cut down on the efficiency and/or cause damage to the unit.”

How to get more heat to the upstairs of home?2018-02-27T15:24:47-04:00

Adjust the louvers inside the registers on the wall or floor in the room where too much heat/cooling is present so that the registers are partially closed. For example, to get more cooling upstairs during hot summer months, partially or fully close the registers downstairs to force more airflow to the upstairs registers. Another possible solution is a furnace equipped with a variable speed blower motor. These furnaces are designed to overcome airflow problems in a home and will keep the airflow steady all over the home. These types of furnaces also use about 1/3 the electricity of a standard furnace and can save considerable amounts of money in operating costs. An Arzel zoning system is also a possible solution to this problem. Zoning is the controlled delivery of heated or cooled air to a particular area of the home, without heating and cooling the entire home. Temperatures can be set and maintained indpendently throughout the home through the use of multiple thermostats.

My thermostat is equipped with a two position setting for the fan, “automatic” and “on”. Where should I set it?2017-04-05T18:06:42-04:00

The two positions are usually used in conjunction with a central air cleaning system. The normal setting is on ‘automatic’ and the fan`s cycle will be controlled by the temperature in the room. However, if your home is equipped with an air cleaner (media or electronic) or you wish to keep a continuous flow of air, switch the setting to “”on””. Remember, central air cleaning devices only work when the furnace is circulating air. If you wish to get the most from your air cleaner, you should keep the setting to ‘on’.

I see the arrow on my furnace filter but I`m not sure how to correctly position it? What should I do?2017-04-05T18:06:23-04:00

The arrow should point in the same direction as the air flow. In most cases, it will point towards the furnace and should fit between the return air part of the system and the furnace. The filter screens out the dust and other impurities before the air is warmed in your furnace and then distributed through the duct system.

How can I make sure that my HVAC system is safe for operation?2017-04-05T18:06:19-04:00

Always have your system checked annually to make sure that the unit is safe. In many cases, tiny cracks or perforations in the heat exchanger occur. If your furnace is burning inefficiently or incompletely, carbon monoxide can escape and fill the house causing serious health problems and/or death to those inside.

Air Conditioner Products

View All Products

Trane Air Conditioners

Trane Logo

Carrier Air Conditioners

Carrier Air Conditioners logo

Stay Cool This Summer!

Get a home comfort system that suits your lifestyle & your budget.
Contact us to schedule a FREE in-home consultation!

Contact Us Today!